tveeprom 3-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)

tveeprom 3-0050: tuner model is SiLabs Si2157 (idx 186, type 4) em28174 #1: Identified as Hauppauge WinTV-dualHD DVB (card=99) em28174 #1: microcode start address = 0x0004, boot configuration = 0x01 tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter tveeprom 1-0050: audio processor is None (idx 0) tveeprom 1-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) tveeprom 1-0050: tuner model is SiLabs Si2157 (idx 186, type 4) em28174 #0: Identified as Hauppauge WinTV-dualHD DVB (card=99) em28174 #0: microcode start address = 0x0004, boot configuration = 0x01 em28xx: New device HCW dualHD 480 Mbps (2040:0265, interface 0, class 0) usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 1-1: New USB device found, idVendor=2040, idProduct=0265 However, for me it seems to do not as no adapters are shown in tvheadend (see also here).įor what I can see in dmesg the adapter seems to be recognized correctly: usb 1-1: new high-speed USB device number 25 using xhci-hcd I’m not sure about the final result of the above efforts, and if the WinTV dualHD should be working out of the box by now on the Vero 4K+.

Hauppauge wintv dualhd dual tv tuner